1.中型濟南貨架的安裝方式： 豎起一個柱片，在底部菱形孔處插入兩根橫梁注意對齊；豎起另一個柱片，按步驟1方式插入橫梁注意對齊；按照以上插入方式，把其余的橫梁按照所需層高依次插入注意對齊；把層板依次放入P型梁上，完成。 Installation of medium-sized Ji'nan shelf: put a column, into two beams at the bottom of the diamond hole note alignment; another piece of string up, step by step into 1 beams that alignment; in accordance with the above insert mode, the rest of the beam according to the required height in order to insert note alignment; put the plate turn into P beam, complete.

2.重型濟南貨架的安裝方法：首先把橫拉（橫撐），斜拉（斜撐）用螺絲安裝在立柱上；組裝好的兩個立柱片豎立在地上；兩片立柱片距離調整為橫梁的長度后裝上橫梁即可；安裝副架的時候也是先把立柱片裝好，然后把裝好的立柱片離主架的一邊立柱片距離調整為橫梁的長度后裝上橫梁即可。The installation method of heavy Ji'nan shelf: first the horizontal pull (brace), cable-stayed (brace) installed in the column by screws; the assembly of the two column piece good erected on the ground; two uprights to adjust the distance between the beam length with beam can be installed; when the subframe is first the column piece installed, then the column piece installed from the main frame side column piece to adjust the distance between the beam length after loading on the beam can be. 

3.懸臂式濟南貨架的安裝方法：專用型材做底座，將兩片C型鋼背對背的用連接鋼板焊接在一起。連接鋼板的寬度即是立柱的寬度；兩片C型鋼焊接完成后在連接立柱位置開連接螺栓眼，便于與立柱連接；邊焊接連接底板，便于膨脹螺栓與地面連接。The installation method of 3 cantilevered shelves of Ji'nan: special steel base, two pieces of C type steel back-to-back connecting plates are welded together. The width of the connecting steel plate is the width of the column; after the two pieces of C steel are welded, the connecting bolt hole is arranged at the position of the connecting column, which is convenient for connecting with the upright post, and the bottom plate is welded and connected with the bottom plate, which is convenient for the expansion bolt to be connected with the ground.